Canon CLC 1120 Service Manual page 557

CHAPTER 13 TROUBLESHOOTING
Points to Note When Replacing
5
the Oil Coating Assembly
Caution:
1. The oil coating unit is adjusted and
assembled at the factory, and must
not be removed. Do not touch the
screws [1] shown in the figure.
2. If you have replaced the oil felt, be
sure to execute COPIER>OPTION>
FIXING>PUMP-ON in service
mode to impregnate it with fixing oil.
Be sure to press the Stop key in about
10 min.
13-30
COPYRIGHT © 1999 CANON INC.
Figure 13-252 (rear)
Figure 13-353 (front)
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[1]
[1]