B. Control Panel
1. Removing the Control Panel
1) Remove the four screws [1].
2) Disconnect the two connectors, and
detach the control panel [2].
2. Removing the Control Panel PCB
1) Turn over the control panel.
2) Disconnect the five connectors [1] of the
control panel PCB.
3) Remove the five screws (M3x8) [2] and
the screw (M3x4) [3]; then, detach the
control panel PCB.
3. Removing the LCD PCB
1) Remove the control panel PCB.
2) Remove the seven black screws [1] and
the grounding screw [2]; then, detach the
control panel fixing plate.
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
Figure 9-710
[1]
[3]
Figure 9-711
[1]
[2]
Figure 9-712
[1]
[2]
[1]
[2]
[1]
9-21