Drive System; Removing The Deck Pickup Clutch (Cl102); Removing The Deck Pickup Motor Assembly - Canon CLC 1120 Service Manual

CHAPTER 10 PAPER DECK
C. Drive System
1. Removing the Deck Pickup Clutch
(CL102)
1) Remove the deck pickup unit. (p. 10-34)
2) Disconnect the connector [1], and remove
the E-ring [2]; then, detach the deck
pickup clutch [3].
Caution:
When mounting the pickup clutch, be
sure to put the clutch in the slip stop [4].
Be sure also to hook the harness on the U
groove [5] of the guide.
2. Removing the Deck Pickup Motor
Assembly
1) Disconnect the deck from the copier; then,
remove the six screws, and detach the ear
cover.
2) Disconnect the two connectors [1] and
remove the four screws [2] of the deck
driver PCB; then, detach the deck pickup
motor assembly [3].
10-28
COPYRIGHT © 1999 CANON INC.
[3]
[1]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[4] [2] [5]
Figure 10-324
[2]
Figure 10-325
[3]