Removing The Attraction Roller Unit - Canon CLC 1120 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM

3. Removing the Attraction Roller Unit

1) Slide out the transfer frame, and remove
the transfer cover and the transfer frame
cover.
2) Remove the screw [1], and disconnect the
two connectors [2]; then, remove the
solenoid unit [3].
3) Remove the screw [4], detach the
positioning pin [5].
4) Move the attraction roller unit [6] to the
front.
Caution:
Take care so that the attraction roller
unit or your fingers will not come into
contact with the transfer sheet.
7-78
COPYRIGHT © 1999 CANON INC.
[4]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
[2]
Figure 7-811
[5]
Figure 7-812
[6]
Figure 7-813
[3]