Canon CLC 1120 Service Manual page 478

CHAPTER 11 INSTALLATION
6) Slide the cassette into the copier.
7) Press the key.
8) Press 'adjust/clean'.
9) Press the
correction), and perform the instructions
on the control panel to execute auto
gradation correction.
Caution:
Before generating test prints, be sure that
paper of B4 or larger is set.
10) Set a test sheet on the copyboard, and
check the images produced by trying all
cassettes as the source of paper. (In the
case of the CLC1150, try the duplexing
tray also.)
Caution:
· Make sure no abnormal noise is heard.
· Check the copy images made at each
default reproduction ratio.
· Check to be sure that as many copies
as set are made normally.
· If the copy images are not normal,
make adjustments by performing the
Image Adjustment Basic Procedure.
11-24
COPYRIGHT © 1999 CANON INC.
key (auto gradation
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)