Canon CLC 1120 Service Manual page 494

6) Connect the connector [3] of the Numeric
Keypad-A1 to the connector J3 [4] of the
copy data controller.
7) Press the switch (SW2) on the copy data
controller to start service mode.
8) Set the input method.
a) Set the card/ID input using the
Numeric Keypad-A1. (Initially, card
input is selected.)
b) To change from card input to ID input,
use the Numeric keypad-A1.
To change from ID input to card input
(requires the Card Required-A1), go to
d).
'MANAGE=CARD' appears.
c) Press '2', and then press 'ENT'.
'MANAGE=ID' appears.
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
[4]
Figure 11-615
SW2
LED1 LED2 LED3
SW2
SW3
LED4 LED5 LED6
JC8
JC5
JC6
JC9
CPU
IPC
J5
6 1 6 1
SW1 ON SW5 ON
Figure 11-616
[3]
JA1
JB2
JA2
JB1
SW4
11-39