Handling The Laser Assembly - Canon CLC 1120 Service Manual

C. Handling the Laser Assembly
Be sure to take extra care whenever servicing areas of the copier's laser assembly, as by
avoiding the insertion of any tool having a high reflectance.
Be sure also to remove any watches and rings. They can reflect the laser beam to damage your
eyes during work.
The copier's laser beam is a red light. Any covers that may reflect the laser beam bear a copy of
the label shown in Figure 1-603. Exercise particular caution whenever servicing inside such covers.
Note:
You will find the label on the copier's laser scanner covers from which laser light can escape.
COPYRIGHT © 1999 CANON INC.
Figure 1-602a
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
1-19