No. 1 Feeding Assembly; Removing The Horizontal Path Assembly - Canon CLC 1120 Service Manual

B. No. 1 Feeding Assembly
1. Construction
2. Removing the Horizontal Path
Assembly
1) Slide out the transfer frame.
2) Remove the screw [1], and disconnect the
two connectors [2]; then, detach the
solenoid unit [3].
3) Disconnect the connector [4], and remove
the two screws [5].
4) Shift the horizontal path assembly [6]
slightly to the right; then, detach it by
pulling carefully to the front.
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
Figure 7-808
[2]
[2]
Figure 7-809
[6]
[4]
Figure 7-810
No.1 feed assembly
[1]
[3]
[5]
7-77