Adjusting The Deck Separation Roller Pressure - Canon CLC 1120 Service Manual

2) Remove the joint, and remove the deck
separation roller [3].
Caution:
The urethane sponge used on the deck
separation roller is initially pink in color,
and changes to orange and to yellow
over time. This phenomenon is
accelerated when the sponge is exposed
to light, and is a general characteristic of
urethane sponge. There is no difference
in performance, and the part is not
identified by color.
7. Adjusting the Deck Separation
Roller Pressure
If double feeding or pickup failure occurs
when pickup is from the side paper deck,
adjust the position of the pressure spring of the
deck separation roller.
· If pickup failure occurs, move the
spring in the direction of arrow A.
· If double feeding occurs, move the
spring in the direction of arrow B.
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 PAPER DECK
[3]
Figure 10-345
A
B
Figure 10-346
10-37