Canon CLC 1120 Service Manual page 806

Projector-Related Items
Level 3
DS-PRJ Use it to adjust the slice level for projection area
detection with the projector in use.
DS-OHP Use it to adjust the slice level for original detection
in reference to the reference sheet of film (e.g., 6x6,
8x10) placed on the copyboard glass with the
projector in use.
RD-XS Use it to adjust the read area when the original
RD-XE detection mechanism is off or when original
RD-YS detection fails even when the original detection
RD-YE mechanism is on with the projector in use.
DA-XS Use it to adjust the read area when the original
DA-XE detection mechanism is on with the projector in use.
DA-YS · This is also used for the read area when the
DA-YE original detection mechanism is off in copyboard
mode.
COPYRIGHT © 1999 CANON INC.
Description
XS
XE
Figure 13-716
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
YS
YE
XE
YE
YS
XS
PRJ>ADJUST
Remarks
0 to 31
Standard: 28
0 to 31
Standard: 22
-300 to +300
Unit: 0.06 mm
Standard: 0
-99 to +99
Standard: 0
XS, XE
Unit: 0.11 mm
YS, YE
Unit: 0.06 mm
13-279