8) Loosen the screw on the tension plate [10].
At this time, take care not to lose the pin.
9) Remove the gear [11] (pay attention to
the pin) and the belt (black) [12].
10) Remove the E-ring [13] at the rear, and
shift the bushing [14].
COPYRIGHT © 1999 CANON INC.
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
Figure 7-750
[11]
Figure 7-751
[13]
[14]
Figure 7-752
[10]
[12]
7-67