Canon CLC 1120 Service Manual page 474

CHAPTER 11 INSTALLATION
3) See that the developing assembly is locked
in position and the screw inside it starts to
rotate (about 10 sec).
Caution:
Be sure to wait until the selected
developing assembly is locked in
position.
4) Fit the starter developer supply funnel that
comes with the copier* in the supply
mouth of the developing assembly, and
hold it in place.
* Do not use the supply funnel, whose
mouth is too small.
· Be sure to try one color at one time.
5) Pour the starter developer into the
developing assembly.
· Try tilting the starter developer bottle
gradually to avoid spilling.
6) When done, press the Stop key to stop the
operation.
· The copier will indicate 'READY'.
11-20
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Starter developer supply flannel
Figure 11-228
Figure 11-229