Canon CLC 1120 Service Manual page 467

8) Wrap lint-free paper around your finger,
and apply drum cleaner lubricant evenly
along the blade of the photosensitive drum
cleaner.
· Be sure to apply evenly. Otherwise,
vertical white lines may appear on copy
images.
· Be sure to apply on all surfaces in
addition to the edge except the bottom
surfaces.
· Do not apply as if to rub it so as to avoid
chipping the edge. Use light, tapping
strokes.
· When applying to the edge, move from
above to the edge surface as if to collect
the lubricant where the drum comes
into contact.
9) Mount the photosensitive drum cleaner
with a screw.
· Take care not to make contact with the
photosensitive drum unit.
10) While holding the cleaner blade releasing
lever in place by hand, loosen the screw so
that the cleaning blade releasing lever is in
locked position; then, screw it in place.
(When the lever is on the right, the blade is
locked in position.)
Caution:
Be sure to fix the screw in place to avoid
possible damage to the cleaner assembly.
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
Cleaning blade
Figure 11-218
Cleaning blade releasing lever
Figure 11-219
Screw
Locked
Unlocked
11-13