Canon CLC 1120 Service Manual page 208

CHAPTER 6 IMAGE FORMATION SYSTEM
18) Remove the threes screws [14], and
detach the photosensitive drum butting
block (rear) [15].
19) Lift the stopper plate [16], and remove
the scraper plate [17].
20) Avoiding the protrusion [18] on the
flange at the rear of the photosensitive
drum,, slide out the photosensitive drum
unit slowly.
6-56
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[15]
[14]
Figure 6-610
[17] [16]
Figure 6-611
[18]
Figure 6-612