Removing The Drum Heater - Canon CLC 1120 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM

5. Removing the Drum Heater

1) Remove the photosensitive drum.
2) Remove the two screws (M4x12) [1], and
detach the photosensitive drum flange
(front) [2].
3) Disconnect the connector [3], and pull out
the drum heater [4].
4) Lift off the photosensitive drum as
shown.
6-60
COPYRIGHT © 1999 CANON INC.
[2]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Figure 6-615
Figure 6-616
Figure 6-617
[4]
[3]