Canon CLC 1120 Service Manual page 325

7) Pull out the registration roller [12] as
shown.
Caution:
The transparency sensor is located under
the metal portion of the registration
roller; be sure not to let the roller in
contact with it.
8) Remove the E-ring [13] and the washer
[14]; then, pull off the bushing [15].
9) While holding the pressure releasing lever
[16] in place by hand, shift the rubber roll
shaft [17] to the left (in the direction of the
arrow), and pull it to the front.
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
[12]
Figure 7-826
[15]
Figure 7-827
Figure 7-828
[14]
[13]
[17]
[16]
7-83