Canon CLC 1120 Service Manual page 321

5) Put the rear positioning shaft (left) [7]
under the gear [8].
6) Put the front positioning shaft [9] through
the large hole to detach the attraction roll
unit.
Caution:
Do not insert the transfer drum frame
without fitting the solenoid unit removed
in step 2) back in to avoid damage.
When you have detached the attraction
roll unit, be sure to mount it back to its
initial position with its screw.
4. Removing the Scraper of the
Attraction Roller
1) Remove the two TP screws [1], and
detach the toner receptacle [2].
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
Figure 7-814
[9]
Figure 7-815
Figure 7-816
[8]
[7]
[2]
[1]
7-79