Cassette Pickup Solenoid - Canon iR C3200 Series Service Manual

Chapter 10
10.10.10.4 Removing the Slide
Resistor
Points to Note Removing the Slide Resistor
When detaching the slide resistor, do not apply excess
force when spreading the claw of the lower cover;
otherwise, the claw can break.
When attaching the slide resistor, take care not to
touch the connector [1] at the edge of the slide resistor.
Try to match the black protrusion [A] behind the slide
resistor against the hole [A] in the tray.
F-10-94
1) Disconnect the connector [1] on the lower cover
side, spread the claw [A], and detach the slide
resistor [2].
F-10-95
10-52

10.10.11 Cassette Pickup Solenoid

0000-4998
10.10.11.1
Cassette
MEMO:
The cassette 1/2 and the pick-up unit 1/2 may also be
removed in the same way.
1) Slide out the cassette.
10.10.11.2 Removing the Front
Right Cover
1) Slide out the manual feed unit, and open the pickup
vertical path cover.
2) Remove the 2 screws [1], and detach the machine's
front right cover [2].
10.10.11.3 Removing the Rear
Right Cover
The rear right cover is fitted with the rear lower cover;
shift it to the direction indicated to detach.
1) Remove the 2 screws [1], and detach the rear right
cover [2].
Removing the
F-10-96
0000-4771
0000-4772
0000-4773