CHAPTER 11 INSTALLATION
2) Connect the connector [3] of the power
supply unit to the connector [4] of the
diagnostic device as shown.
3) Remove the four screws [6], and detach
the face plate [5] of the copier's rear cover.
11-48
COPYRIGHT © 1999 CANON INC.
[5]
[6]
[6]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[4]
Figure 11-702
Figure 11-703
[3]