Adjusting The Position Of The Blank Shutter Solenoid - Canon NP6330 Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM

4. Adjusting the Position of the Blank Shutter Solenoid

Adjust the position of the solenoid so that section A in the figure is 7.7 ±0.5 mm on
both sides when its plunger is moved in the direction of activation. (When taking
measurements, take care not to force the shutter with slide calipers.)
After making adjustments, check to make sure that the plunger of the solenoid
moves smoothly.
4-32
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Figure 4-315
Figure 4-316
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)