2) Remove the old flash memory PCB from
the CPU PCB.
3) Mount the new flash memory to the CPU
PCB.
4) Turn on the power switch.
5) Select FUNCTION>CLEAR>DC-CON
and R-CON in service mode, and set them
to '1'.
6) Enter the data values recorded in step 1).
7) Execute FUNCTION>CCD>CCD-ADJ
in service mode.
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
9-33