Table of Contents
Advertisement
10 Set PTZ
10.2 [Position] for setting positions
[Tilt Angle]
Select the angle limit of tilt operation from the following. (Horizontal = 0°)
10°/ 5°/ 3°/ 0°/ −3°/ −5°/ −10°/ −15°/ −20°/ −25°/ −30°
Maximum speed of optical zoom
Select the maximum speed of the optical zoom.
[High]/[Mid]/[Low]
[Maximum panning/tilting speed]
Select the maximum speed for pan tilt operation.
[1°/s], [2°/s], [5°/s], [10°/s], [25°/s], [50°/s], [90°/s], [135°/s], [150°/s],
[300°/s], [400°/s], [500°/s], [600°/s], [Unlimited]
[Focus distance]
If you have a object over the window or a different object over a short distance, it may be difficult
to focus on the object you want to view. If the camera is not focused properly, you can limit the
shortest shooting distance.
[Unlimited]/[1.5m]/ [3m]/ [5m]/ [10m]
[Auto position refresh]
When the automatic position refresh is set to ON, if the pan (turn) angle is misaligned by a certain
amount, the position is automatically refreshed and moves to the original position.
[On]:The position is automatically refreshed.
[Off]:Position refresh is not performed automatically.
10.2
[Position] for setting positions
Click on the [Position] tab of the PTZ page. Refer to the following how to display and operate the
Advanced menu.
center of the field angle moves the orientation of the camera to the center of the
clicked position. In this case, the product continues to operate without stopping at
the tilt end point.
• During flip movement, the image being moved is displayed.
[Note:]
The screen may be partially darkened if it is directed above-20 degrees.
306
Advertisement
Table of Contents
