Table of Contents
Advertisement
2 Operation
2.2 Initial setting (Multi-directional/PTZ integrated camera)
Multi-directional camera, uncheck the checkbox and enter [User name] and [Password].
・ [User name (1 to 32 characters)]
Enter an administrator username.
・Number of characters that can be entered:1 to 32 characters
・Characters that cannot be entered:Double-byte and single-byte symbols " & : ; ￥
・ [Password (8 to 32 characters)]/[Retype password]
Enter the administrator's password.
・Number of characters that can be entered:8 to 32 characters
・Characters that cannot be entered:Double-byte and single-byte symbols " &
After registering the user name and password of the administrator, the Language/Datetime
setting screen is displayed.
Language/Datetime Settings
[Note:]
・Enter case-sensitive data.
・Use at least three of the following passwords: uppercase alphabetic characters,
lowercase alphabetic characters, numbers, and symbols.
・Configure the password so that it does not contain the user name.
・If you want the PTZ camera and the Multi-directional camera to work together by
screen clicking or alarm notification, set the same user name and password for
both cameras.
[Important]
・If the set user name or password is lost, the camera must be initialized. When the
camera is formatted, all settings will be cleared. Keep the user name and password
out of the eyes of third parties. Refer to the Operation Manual Web Guide for the
formatting method.
・Do not use other cameras, devices, or other passwords.
18
Advertisement
Table of Contents
