i-PRO WV-X86531-Z2-PTZ User Manual page 224

8 [Basic] for basic setup of the machine
8.2 [SD memory card] for setting SD Memory Cards
*Actual recording time may be longer than the time set for the post alarm time.
SD memory card information
[Remaining capacity]
The remaining capacity and total capacity of the SD Memory Card are displayed.
Depending on the status of the SD Memory Card, it may be displayed as follows.
Within the display
‑‑‑‑‑‑‑‑MB/‑‑‑‑‑‑‑‑MB
********MB/********MB
########MB/########MB
[Format]
To format the SD memory card, click the [Execute] button.
Format in the file format selected in [SD Memory Card File System Format].
Description
SD Memory Card is not inserted.
Otherwise, the remaining capacity cannot be acquired due to a
read error.
SD Memory Card is not formatted.
The password lock of the SD Memory Card cannot be canceled.
[Note:]
・When [Overwrite] is set to [Off] and the remaining capacity of the SD Memory
Card becomes [0MB], images are not saved to the SD Memory Card. When the
free space on the SD Memory Card runs out, the specified mail address and
unique alarm notification destination can be notified with the notification function.
→12.4.2 Mail sending when an alarm is generated
→12.10 [Notification] to set alarm notification
[Note:]
・When formatting an SD memory card with [ext(ext4)] selected for [SD Memory
Card File System Format], formatting may take about 20 minutes until it is
completed depending on the SD memory card.
・After formatting the SD memory card in ext format, check the operation of the
extension software using the SD memory card.
[Important]
・Prior to formatting, set [SD memory card] to [Use] on the basic pages.
→8.2 [SD memory card] for setting SD Memory Cards
・The SD Memory Card must be formatted using the [SD memory card] tabs before
using the SD Memory Card. The following functions may not work properly when
formatted outside of the [SD memory card] tabs.
217