Table of Contents
Advertisement
10 Set PTZ
10.1 [Cam. Function] for setting the operation of cameras
When the time set by [Self return time] has elapsed after manual operation, the camera can
automatically return to one of the following modes of operation.
[Off]:Do not perform self-return.
[Home position]:After the set time has elapsed, the watch returns to the home position.
[Auto Pan]:When the set time elapses, the auto pan operation starts.
[Preset Sequence 1]:When the set time elapses, Sequence 1 operation starts.
[Preset Sequence 2]:Sequence 2 operation starts when the set time elapses.
[Preset Sequence 3]:Sequence 3 operation starts when the set time elapses.
[Patrol]:When the set time elapses, the patrol operation starts.
[Self return time]
After the manual operation is completed, select the time from the following to return to the
operation set by [Self return].
[10s]/ [20s]/ [30s]/ [1min]/ [2min]/ [3min]/ [5min]/ [10min]/ [20min]/ [30min]/ [60min]
[Maximum optical zoom ratio]
Select the maximum zoom ratio for the optical zoom from the following. Refer to the catalog
specifications for the installed optical zoom ratio.
・Optical zoom: 21x model x1/x2/x3/x4/x5/x6/x7/x8/x9/x10/x11/x12/x13/x14/x15/x16/x17/
x19/x20/unlimited
・Optical zoom: 30x model x1/x2/x3/x4/x5/x6/x7/x8/x9/x10/x11/x12/x13/x14/x15/x16/x17/
x18/x19/x20/x21/x22/x24/x26/x27/x28/x29/unlimited
・Optical zoom: 32x model x1/x2/x3/x4/x5/x6/x7/x8/x9/x10/x11/x12/x13/x14/x15/x16/x17/
x18/x19/x20/x21/x22/x23/x24/x26/x27/x28/x30/x31/unlimited
・Optical zoom: 40x model x1/x2/x3/x4/x5/x6/x8/x8/x9/x10/x11/x12/x13/x14/x15/x16/x17/
x18/x19/x20/x21/x22/x23/x24/x26/x27/x28/x29/x30/x31/x32/x33/x34/x36/x37/x38/x39/
unlimited
[HD Extra optical zoom]
Select the setting of HD EX optical zoom from the following.
[Note:]
If you want to perform the above operations when turning on the power, it is
convenient to use the self-turn function.
The Self-turn function works even when the Setup menu is displayed.
・[Patrol] can be set only when patrols are set.
→10.2.4 Set patrol (Patrol function setting screen)
・[Preset sequence] can be set only when the preset sequence is set.
→10.2.2 Set the preset sequence setting (preset sequence setting screen)
303
Advertisement
Table of Contents
