i-PRO WV-X86531-Z2-PTZ User Manual page 325

10 Set PTZ
10.2 [Position] for setting positions
Patrol setting
[Number of patrol pattern]
Select the number of memories in the patrol. The amount of time that can be stored varies
depending on the number of memories.
1:The operation for 2 minutes is stored in Patrol 1.
2:The operation for one minute is stored in Patrol 1 and Patrol 2.
4:The operation for 30 seconds is stored in Patrol 1, Patrol 2, Patrol 3, and Patrol 4.
[Learn patrol pattern]
Select the patrol number (1 to 4) you want to set by clicking [▼] on the [Patrol No.]. The [*]
mark to the right of the patrol No. indicates that the patrol operation has already been stored.
[Note:]
・If the patrol function is used for a long time, the drive parts may be consumed and
the replacement cycle of consumables may be faster. For consumables, refer to
the Web Guide.
[Note:]
・When the number of memories is changed, the stored patrol operation is deleted.
318