Table of Contents
Advertisement
7 [Easy Setup] to use easy setting
7.3 [Event action] for setting events
[Frame rate*]
Set the frame rate of H.265 (or H.264) to be recorded from the following.
–If [Image capture mode] is set to 30 fps:
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
–If [Image capture mode] is set to 25fps:
1fps/ 3.1fps/ 4.2fps*/ 6.25fps*/ 8.3fps*/ 12.5fps*/ 20fps*/ 25fps*
–If [Image capture mode] is set to 15 fps:
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*
–If [Image capture mode] is set to 12.5 fps:
1fps/ 3.1fps/ 4.2fps*/ 6.25fps*/ 8.3fps*/ 12.5fps*
The bit rate is automatically set according to the selected resolution and frame rate. Check the
[Bit Rate* per Client] settings for each stream.
[Overwrite]
You set whether to overwrite and save images when the free space on the SD Memory Card is
running low.
[On]:If the free space on the SD Memory Card decreases, the old image is overwritten and saved
repeatedly.
[Off]:If the SD Memory Card has no free space, the SD Memory Card stops storing data.
[Note:]
・If the audio distribution mode is set to bi-directional (half duplex), the settings
cannot be made.
[Important]
・When [Overwrite] is switched from [Off] to [On], the old images may be deleted
to prepare for writing if there is not enough space on the SD Memory Card.
[Note:]
・When [Next] is clicked, [Transmission priority] is set to [Frame rate].
[Important]
・When [Overwrite] is switched from [Off] to [On], the old images may be deleted
to prepare for writing if there is not enough space on the SD Memory Card.
191
Advertisement
Table of Contents
