Table of Contents
Advertisement
8 [Basic] for basic setup of the machine
8.1 [Basic] to perform basic settings
[Image Rotation]
Select from [0 °(Off)], [90°] and [180 °(Upside-down)], and [270°].
[Note:]
・When shaking occurs in a dark shooting environment, the shaking correction
effect may be improved by setting the maximum exposure time to [1/100s] or
faster shutter setting. Set the maximum exposure time depending on the
installation environment.
・When [Stabilizer] is set to [On], the superdynamic setting is [Off].
・[PTZ]When [Stabilizer] is set to [On], the digital zoom factor is limited to half.
・Refer to the catalog specifications for the functions installed in each model.
[Important]
・If the [Image rotation] setting is changed with the following area set, the set area
will be misaligned. Set [Image rotation] and then set the respective areas.
-Privacy Zone
-Operation detection area
Undesired detection area
VIQS area
Mask area
-overlay image
・If [Image rotation] is set to [90°] or [270°], the on-screen characters may be
broken depending on the [Character size] setting and the number of characters.
・When [Image rotation] is set to [90°] and [270°], the positions that can be set
to [Date/time position] and [Camera title position] are limited to [Upper left] and
[Lower left].
・[New X Fixed]When [Stabilizer] is [On] and [Image rotation] is set to [90°] or
[270°] from an external device, the system automatically restarts.
・[New X Fixed]When [Image rotation] is set to [90°] or [270°], [Stabilizer]
cannot be used.
・[New X Fixed]When [Image rotation] is set to [90°] or [270°] and 320x180,
QVGA images are displayed, characters in the images may be cut off.
[Note:]
・Depending on the [Image capture mode], you may not be able to set the [Image
Rotation] to [90°] or [270°].
・If [Image capture size] is 320 x 180, [Image rotation] cannot be set to 90° or
205
Advertisement
Table of Contents
