Table of Contents
Advertisement
1 Introduction
1.7 Instructions for use
MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
Position Refresh
[PTZ Cameras]
If the watch is used for a long time, the preset position may be misaligned. It is recommended to
set position refresh using the schedule function and periodically correct camera misalignment.
Refer to the following instructions for setting.
→15 [Schedule] for scheduling
In the event the Aircraft is transferred or disposed of
The contents of the information recorded on the computer and the contents of the information
recorded on the storage media used with the computer may correspond to "personal information."
When handing over the unit to a third party for disposal, transfer, repair, etc., pay careful
attention to the handling. When discarding the storage media, it is recommended to physically
destroy the data after deleting it with a PC, etc.
In addition, delete the device or user information registered in the external service or application
that uses this machine.
Connection to the Internet
The Aircraft cannot be connected directly to communication lines (including public wireless LANs)
of telecommunications carriers (mobile carriers, fixed carriers, Internet providers, etc.). When
connecting the computer to the Internet, be sure to connect via a router.
Protection of personal information
Personal information shot using the system is subject to the Personal Information Protection Law.
Handle video information properly in accordance with the law.
※Refer to the "Guidelines for the Act on the Protection of Personal Information (General Rules)"
of the Personal Information Protection Committee for examples corresponding to personal
information.
About HEVC(High Efficiency Video Coding) patents
Covered by one or more claims of the HEVC patents listed at patentlist.accessadvance.com.
About Routers
When connecting this product to the Internet and using a router, use a broadband router with a
port forwarding function (NAT, IP Mascalade). For an overview of the port forwarding feature, see
the following.
→14.1 Networking [Network]
Time Setting
The this product must be set to the time prior to starting operation. For the time setting, refer to
the following.
→2.1 Initial Setting
9
Advertisement
Table of Contents
