Table of Contents
Advertisement
14 Networking configuration [Network]
14.2 [Advanced] for advanced networking settings
The data format of the root CA certificate can be PEM or DER.
[Information]
The root CA certificate information is displayed.
[Off]:Root CA certificate is not installed.
Root CA Certificate Host Name:Displayed when installed.
You can view the root CA certificate in detail by clicking [Execute].
Clicking [Delete] deletes the installed root CA certificate.
[Server certificate verification]
Select [MQTT over SSL] for [Protocol] and, if [Server certificate verification] is [On], verify the
server certificate using the root CA certificate registered when connecting to SSL.
Provision of noticeFixed
[Alarm]
Check the alarm event to notify the MQTT server.
[Terminal 1]:The MQTT server is notified when an alarm is generated at terminal 1.
[Terminal 2]:The MQTT server is notified when an alarm is generated at terminal 2.
[Terminal 3]The MQTT server is notified when an alarm is generated at terminal 3.
[VMD]:The MQTT server is notified when an operation detection occurs.
[Audio detection]:Notifies the MQTT server when sound detection occurs.
[Command alarm]:Notifies the MQTT server when a command alarm is entered.
[Topic]
Specify the name of the MQTT topic to be sent. The topics are hierarchically separated by /.
Number of characters that can be entered:1 to 128 characters
Input Characters:Single-byte alphanumeric and single-byte symbols
Prohibited Characters:One-byte symbol ¥
[Payload]
Set the MQTT message payload.
Number of characters that can be entered:1 to 128 characters
Input Characters:Single-byte alphanumeric and single-byte symbols
Prohibited Characters:One-byte symbol ¥
[QoS]
Select the level of QoS from 0, 1, or 2. 0<1<Communication quality is high with 2.
[Note:]
If the [Server certificate verification] is [On], install the root CA certificate.
426
Advertisement
Table of Contents
