i-PRO WV-X86531-Z2-PTZ User Manual page 50

2 Operation
2.3 Viewing images from a PC
→10.2.2 Set the preset sequence setting (preset sequence setting screen)
[H] next to the number indicates [HomePosition]. Select [HomePosition] to move the
orientation of the camera to the home position.
→10.1 [Cam. Function] for setting the operation of cameras
If [Preset ID (0 – 9,A – Z)] is registered, the position name is displayed next to
the number.
⑰PTZ-Panel-[Cam. Function]
[Home position]
The preset [Preset position] can be set as a [HomePosition]. When set to [HomePosition], [H]
is displayed next to the preset position number.
→10.2.1 Set the preset position (preset position setting screen)
[Self return]
When the time set by [Self return time] has elapsed after the manual operation is completed,
the camera can automatically return to the operation mode set by the camera.
[Self return time]
After the manual operation is completed, select the time before returning to the operation set
by [Self return].
⑱[Camera control panel]− [Brightness]
It can be adjusted from 0 to 255. Clicking the button brightens the image. Click the button
to darken the image. Click the button to return to the default settings.
⑲[Camera control panel]-[Transmission voice (from PC)]
This can only be set if [Audio transmission mode] is set to [Audio output] or [Interactive(Full-
[Note:]
・If you want to move to the home position when the power is turned on, set
[HomePosition] to [Self return].
[Note:]
・If you want to perform the above operations when turning on the power, it is
convenient to use the self-return function.
・The self-return function works even when the setting menu is displayed.
・[Patrol] can be set only when patrols are set.
→10.2.4 Set patrol (Patrol function setting screen)
・[Preset sequence] can be set only when preset sequence is set.
→10.2.2 Set the preset sequence setting (preset sequence setting screen)
43