i-PRO WV-X86531-Z2-PTZ User Manual page 338

10 Set PTZ
10.4 Set Auto Track Alarm (Auto Track Alarm screen)
tracking object is in the set alarm area. Refer to [Alarm area] for the alarm settings.
[Alarm wait time]
If [Auto track alarm] is set to [On(After alarm wait time)], select the set time from the following.
[1s]/ [10s]/ [30s]/ [1min]/ [3min]/ [5min]
Alarm area
[Area select]
Click [▼] on the [Area No.] and select the area number (1 to 8) to be set. The [*] mark to the
right of the area No. indicates that the area is already stored. The alarm area is enabled when On
(when the alarm area enters) is selected for automatic tracking alarm.
[Area No. notification]
Clicking [TCP alarm notification setup] displays the [Notification] tabs on the Alarm Page.
→12.10 [Notification] to set alarm notification
[Note:]
・The alarm area cannot be set individually for each preset position. The
configured area is valid for all preset positions.
331