Table of Contents
Advertisement
7 [Easy Setup] to use easy setting
7.3 [Event action] for setting events
For details on how to set up the above screen, refer to the following.
→14.2.2 Configuring FTP/SFTP transmission function
[Next] buttons
Select [Alarm output] in the Alarm Settings window and press [Next] to open the Alarm Outputs
dialog box.
→7.3.5 Alarm: Sets output terminal.
If you do not select [Alarm output] on the Alarm Settings screen and [Next] is clicked, the Mail
Settings screen is displayed.
→7.3.6 Alarm: Configuring mail notification and mail server
[Back] button
Returns to the previous screen.
Setting SD recording (JPEG recording setting screen)
The SD recording (JPEG) for alarm detection is set here.
See the [JPEG recording(Alarm)] below for instructions on how to set up the window above.
→8.2 [SD memory card] for setting SD Memory Cards
[Next] buttons
Select [Alarm output] in the Alarm Settings window and press [Next] to open the Alarm Outputs
dialog box.
→7.3.5 Alarm: Sets output terminal.
[Note:]
・Clicking [Next] saves the settings in the window.
184
Advertisement
Table of Contents
