Connect To The Camera; Ip Setting Software; Access The Camera - i-PRO WV-X86531-Z2 Web Manual

3. Connect to the camera
3.2 Access the camera
3.1

IP Setting Software

Cameras or recorders on the same network can be automatically detected and set up in the
network.
3.2

Access the camera

(1) Launch an IP Setting Software
・ The model number and MAC address of the detected camera are displayed.
・ The default setting for the [Network Settings] of the PTZ and multi parts is [DHCP].
(2) Double-click the camera's IP address
・ The browser starts and the administrator registration screen is displayed.
・ Double-click the IP address of the PTZ part and the IP address of the multi part.
Administrator registration is required for each camera.
3. Connect to the camera
Refer to the following for details on the IP Setting Software.
→Click here for more information on the IP Setting Software
5