Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
The camera control panel can be displayed or hidden. The camera control panel can be set to
[Brightness], etc.
⑭[Camera Control Panel]-[Brightness]
It can be adjusted from 0 to 255. Clicking the button brightens the image. Click the button
to darken the image. Click the button to return to the default settings. This cannot be set
when [Dual] is displayed.
⑮[Camera Control Panel]-[Transmission voice (from PC)]
This can only be set if [Audio transmission mode] is set to [Audio output] or [Interactive(Full-
duplex)] [Interactive(Half-duplex)] in the configuration menus.
→3.7 [Audio] for setting sound
Buttons, By clicking on the buttons or by moving the volume cursors, you can adjust the
volume of the call by four levels: [Off], [Low], [Middle] and [High].
Click the talk button to turn on/off the talking voice (from PC).
⑯[Camera Control Panel-[Voice (on PC)]
This item can be set in the following settings.
[Note:]
・This item is not displayed when [Image capture mode] is in Dual mode.
[Note:]
・Transmission voice can only be used when connected with HTTPS.
・If [Interactive(Half-duplex)] is set while one user is talking, the other user's
listening will be stopped and the earpiece button and the talk button will not be
operable. If set to [Interactive(Full-duplex)], other users will not be able to use
the call key.
・The maximum call duration per call is set on the [Audio] tabs of the video and
audio pages. The call stops after the set continuous call time. If you want to make
another call, click the call button.
・When the computer is restarted, the earpiece volume/voice volume changed by
the volume cursor will return to the earpiece volume/voice volume set in the
[Audio] tab of the image/voice page.
→3.7 [Audio] for setting sound
・On the screen, the volume cursor can be fine-tuned, but actually it is set to one
of four levels of volume.
51
Advertisement
Table of Contents
