Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
The main area image is displayed according to the settings in the stream and JPEG.
You can also configure the [Initial display stream] of the [Image] tabs to show the first
streams that appear when you are accessing the cameras.
→3.3 [Stream] for setting images
⑬[Select Streams]-[Refresh Rate] pull-down menu
This pull-down menu is displayed only when the JPEG image is displayed. Select how the JPEG
image is displayed.
MJPEG:Displays a JPEG image as a series (MJPEG: Motion JPEG).
[Still image updates: 1 second]/[Refresh interval : 3s]/[Refresh interval : 5s]/[Refresh interval :
10s]/[Refresh interval : 30s]/ [Refresh interval : 60s]:Updates JPEG images (still images) at
specified intervals.
⑭[Select stream]-[View stream information]
Displays the settings of the compression method, resolution, bit rate, frame rate, etc. of the live
image being displayed.
⑮[Main area]
[Note:]
・When the resolution is [1280x720] or higher, the size of the browser screen may
be smaller than the actual size.
・[MULTI] This item is not displayed when [Image capture mode] is in quad mode.
・[MULTI] When selecting 1, 2, 3, or 4, if the resolution is [1280x720] or higher or
[Image capture mode] is Quad-mode, the size of the browser screen may be
smaller than the actual size. When [Quad] [Triple] is selected, the size of the
browser screen may be smaller than the actual size at any resolution.
[Note:]
・The JPEG format (still image) update interval may not be updated at the specified
interval, depending on your network environment or PC.
・[MULTI] When [Quad] [Triple] is selected in the [Live view] pull-down menu,
[Refresh interval : 1s] and [Refresh interval : 3s] cannot be selected.
[Note:]
・Displays the value set in the stream. The actual bit rate and frame rate vary
depending on your network environment and PC.
58
Advertisement
Table of Contents
