Table of Contents
Advertisement
15 [Schedule] for scheduling
[Alarm permission(Terminal alarm 1,2,3)]:Allows the alarm input of the terminal while the
schedule is being set.
[Alarm permission(Terminal alarm 1)]:The alarm input of terminal 1 is enabled while the
schedule is set.
[Alarm permission(Terminal alarm 2)]:Allows alarm input of terminal 2 while schedule is set.
[Alarm permission(Terminal alarm 3)]:Allows alarm input of terminal 3 while schedule is set.
[VMD permission]:Operation detection is enabled while the schedule is set.
[SCD permission]:Permits disturbance detection while scheduled.
[Audio detection permission]:During scheduling, sound detection is enabled.
[Access permission]:Images are prohibited from being viewed by users with [2. Camera
control] or [3. Live view] access levels set in the [User auth.] tabs, except when scheduled.
→13.1 [User auth.] to configure user-authentication
[SD memory recording]:When the scheduled time is reached, SD recording set by [Recording
stream] is executed. It is valid only when [Recording format] is streamed.
[All detect permission]:If [DDNS] is set to [Viewnetcam.com], only Schedule 8 can be
selected. All alarm inputs are allowed while the schedule is set. [Sun] and [24h] are
automatically set from [Mon] and cannot be changed.
[Image quality 1]:Scene1 (Scene File 1): When the scheduled time is reached, the image
quality is set to [Scene File 1]. When the scheduled time is over, the [Scene file is not
applied] image quality is set.
[Image quality 2]:Scene2 (Scene File 2): When the scheduled time is reached, the image
quality is set to [Scene File 2]. When the scheduled time is over, the [Scene file is not
applied] image quality is set.
[Image quality 3]:Scene3 (Scene File 3): When the scheduled time is reached, the image
quality is set to [Scene File 3]. When the scheduled time is over, the [Scene file is not
applied] image quality is set.
[Image quality 4]:Scene4 (Scene File 4): When the scheduled time is reached, the image
quality is set to [Scene File 4]. When the scheduled time is over, the [Scene file is not
applied] image quality is set.
[FTP/SFTP periodic image transmission]:When the scheduled time is reached, FTP/SFTP
periodic transmission is executed.
[E-mail permission]:Mail notification is executed when an alarm is generated while the
schedule is set.
[Reboot]:When the scheduled time is reached, the camera restarts. Only available in
Schedule 8.
[Position refresh]:The position is refreshed when the scheduled time is reached.
438
Advertisement
Table of Contents
