Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
duplex)] [Interactive(Half-duplex)] in the configuration menus.
Buttons, Click the button or move the volume cursor to adjust the voice volume in four
steps: Off/weak/medium/strong.
Click the talk button to turn on/off the talking voice (from PC).
→3.7 [Audio] for setting sound
⑳[Camera control panel]-[Voice (on PC)]
This item can be set in the following settings.
• If [Audio transmission mode] is set to [Mic input] or [Interactive(Full-duplex)] [Interactive
(Half-duplex)]
• If [Audio input encoding format] is set to [AAC-LC]
Buttons, You can adjust the earpiece volume in four steps: [Off], [Low], [Middle], and
[High] by clicking on buttons or by moving the volume cursor.
Click the Listen button to turn on/off the earpiece voice (heard on PC).
→3.7 [Audio] for setting sound
[Note:]
・Transmission voice can only be used when connected with HTTPS.
・If [Interactive(Half-duplex)] is set while one user is talking, the other user's
listening will be stopped and the earpiece button and the talk button will not be
operable. If set to [Interactive(Full-duplex)], other users will not be able to use
the call key.
・The maximum call duration per call is set on the [Audio] tabs of the video and
audio pages. The call stops after the set continuous call time. If you want to make
another call, click the call button.
・When the computer is restarted, the earpiece volume/voice volume changed by
the volume cursor will return to the earpiece volume/voice volume set in the
[Audio] tab of the image/voice page.
・On the screen, the volume cursor can be fine-tuned, but actually it is set to one
of four levels of volume.
→3.7 [Audio] for setting sound
[Note:]
・When [Audio volume control mode] is set to [Adjust Mic input] in the Setup
menu, the volume cursor is not displayed when using [Audio recording] or [Audio
detection].
・When the computer is restarted, the earpiece volume changed by the volume
44
Advertisement
Table of Contents
