Table of Contents
Advertisement
14 Networking configuration [Network]
14.4 How to configure DDNS
14.4
How to configure DDNS
When using the DDNS function on your computer, you can use one of the following DDNS
services:
[Viewnetcam.com] services
Dynamic DNS Update (RFC 2136)
[Note:]
・When using a CA certificate, make sure you enter the information that is
required by the certification authority you are applying to.
・For the [Host name], [State], [Locality], [Organization], and [Organizational
Unit], you can enter the following characters:
0 to 9, A to Z, a to z, and the following symbols:
- . _ , + / ( )
・For the [Subject Alternative Name], you can enter the following characters:
0 to 9, A to Z, a to z, and the following symbols:
. : * , -
・When entering multiple domain names in [Subject Alternative Name], separate
them with commas.
[Important]
・You must configure port forwarding for routers before using the DDNS service.
・About [Dynamic DNS (DDNS)] Update (RFC 2136)
We do not guarantee the operation of any DDNS services other than the
[Viewnetcam.com] service. Therefore, you are not liable for any failure or damage
caused by the use of DDNS services other than the [Viewnetcam.com] service.
For selection and configuration of DDNS services other than [Viewnetcam.com]
services, please contact the service provider.
・Check the [Viewnetcam.com] service website for browsers supported by the
[Viewnetcam.com] service.
[Note:]
・The [Viewnetcam.com] service (fee-based) is the DDNS service we recommend.
For more information about the [Viewnetcam.com] service, refer to the
[Viewnetcam.com] Service website (http://www.viewnetcam.com/).
430
Advertisement
Table of Contents
