Table of Contents
Advertisement
14 Networking configuration [Network]
14.2 [Advanced] for advanced networking settings
number
Number of characters that can be entered:1 to 32 characters
Characters that cannot be entered:Double-byte and single-byte symbols " & * / : ; < > ? ¥ ¦
When [On] is selected for [Alarm image FTP transmission], you can select the alarm type from the
following.
[Terminal 1]:Transmit the image to the server when an alarm occurs in Terminal 1.
[Terminal 2]:Transmit the image to the server when an alarm occurs in Terminal 2.
[Terminal 3]:Transmit the image to the server when an alarm occurs in Terminal 3.
Periodic transmission settings
Periodic image transmission is available only for "Alarm setting/Alarm setting (Server 1)".
[Periodic image transmission]
Select [On] or [Off] to determine whether or not to transmit images using the periodic image
transmission function.
[On]:Periodic image transmission is performed.
[Off]:Images are not sent regularly.
[Directory name]
[Note:]
・The items that can be set differ depending on the function of the model.
・Refer to the catalog specifications for the functions installed in each model.
・Terminals 1 to 3 of [Alarm setting (Server 2)] can be selected only when terminals
1 to 3 of [Alarm setting/Alarm setting (Server 1)] are not selected.
・[Alarm setting (Server 2)] uses [FTP transmission retry], [Pre alarm], [Post
alarm], and [Image capture size] of [Alarm setting/Alarm setting (Server 1)].
[Note:]
・[New X Fixed-8MP][New X Fixed-6MP][Periodic image transmission] is not
available when [Image capture mode] is set to [60fps Mode] or [50fps Mode].
[Important]
・When using periodic image transmission, it is necessary to configure the schedule
settings of FTP/SFTP periodic image transmission on the [Schedule] tab of the
"Schedule" page.
→7.3.9 Schedule: Setting FTP/SFTP Periodic Transmission (FTP/SFTP
Periodic Transmission Setting Screen)
408
Advertisement
Table of Contents
