i-PRO WV-X86531-Z2-PTZ User Manual page 387

13 [User mng.] to set authentication
13.4 [IEEE 802.1X] to configure IEEE 802.1X
Characters that cannot be entered:Full-pitch and half-pitch alphanumeric characters " & : ; ￥
[Password] [Retype password]
Enter the password to access the authentication LAN switch.
Number of characters that can be entered:4 to 32 characters
Characters that cannot be entered:Full-pitch and half-pitch alphanumeric characters " &
[CA Certificate] ‑ [Certificate install]
Install the root CA certificate. Do not include intermediate CA certificates.
Only when [IEEE 802.1X] is [Off] can you install it.
■CA Certificate Specifications
Item
Data format
Maximum number of
certificates included in
the PEM format
Maximum certificate size About 10 kB
[CA Certificate] ‑ [Information]
Not installed:Have no certificates installed
[CA certificate host name]:Displayed when installed
[Expired]:Certificate expired
The [Execute] buttons enable you to view more information about CA certificates.
You can delete a CA certificate by using the [Delete] buttons.
[Private key or Client Certificate including private key]-[Installation]
Install a client certificate that contains a private key or private key.
Only when [IEEE 802.1X] is [Off] can you install it.
■Specification of Client Certificate with Private Key or Private Key
Item
Data format
Specifications
PEM format or DER
format
1 piece
[Note:]
・Verify that the CA certificate has not expired. If you use an expired certificate,
you may not be able to connect to the authentication LAN switch.
Specifications
PEM format or PFX
format
Remarks
Extension pem or der
Remarks
Extension pem or pfx
380