i-PRO WV-X86531-Z2-PTZ User Manual page 258

Table of Contents

Advertisement

9   [Image/Audio] for setting images and sound files
9.3   [Image] for setting up streams
[Transmission type]
Select the distribution method of H.265 (or H.264) image from the following.
[Unicast port (AUTO)]:
When sending images and sounds from your computer, [Unicast port1(Image)] and [Unicast
port2(Audio)] are automatically set. If you do not need to fix the number of the ports on which the
streams are delivered, such as when used in networks, it is recommended that you set it to
[Unicast port (AUTO)].
[Unicast port (MANUAL)]:
When sending images and audio from the computer, the [Unicast port1(Image)] and [Unicast
port2(Audio)] must be set manually. When accessing a camera using a browser, the port number is
automatically selected even in this setting. When distributing a stream over the Internet, fix the
port number to be used as the Broadband Router (hereinafter referred to as the Router). For
details, refer to the router's instruction manual.
→14.1 Networking [Network]
[Multicast]:
You can access this machine at the same time without restricting the number of people. To send
streams in multicast, enter [Multicast address], [Multicast port], and [Multicast TTL/HOPLimit].
[Unicast port1(Image)]
Enter the unicast port number (used to send images from your computer).
Configurable port number:1024 to 50000 (even number only)
[Unicast port2(Audio)]
Enter the unicast port number (to be used when sending audio from your computer).
Configurable port number:1024 to 50000 (even number only)
[Multicast address]
frame rate, the longer the refresh interval. The maximum refresh interval is 16s.
・[MULTI] This setting is common to all cameras.
[Note:]
・For the maximum number of simultaneous unicast accesses, see the following.
→2.3.1 View camera images
・If [Unicast port (MANUAL)] is selected, you must configure a unicast port number.
・When multicast is set, the browser will not be able to view the H.265 image (or
H.264 image).
・If [Multicast] is selected, you must configure multicast IP addresses.
・[MULTI] This setting is common to all cameras.
251

Advertisement

Table of Contents
loading

Table of Contents