Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
The image to be displayed in the main area can be selected from the following.
[Dual]When selected: [Streams(2)]/ [JPEG]
When 1 or 2 is selected: [Stream(1)]/ [Stream(2)]/[JPEG]
The main area image is displayed according to the settings in streams (1) to (2) and JPEG.
You can also configure the [Initial display stream] of the [Stream] tabs to show the first streams
that appear when you are accessing the cameras.
→3.3 [Stream] for setting images
⑥[Select Streams]-[Refresh Rate] pull-down menu
This pull-down menu is displayed only when the JPEG image is displayed. Select how the JPEG
image is displayed.
[MJPEG]:Displays a JPEG image as a series (MJPEG: Motion JPEG).
[Refresh interval : 1s]/[Refresh interval : 3s]/[Refresh interval : 5s]/[Refresh interval :
10s]/[Refresh interval : 30s]/ [Refresh interval : 60s]:Updates JPEG images (still images) at
specified intervals.
⑦[Select Streams]-[Layout] pull-down menu
This pull-down menu is displayed only when it is displayed in [Dual].
Select the display layout of the camera image to be displayed in the main area from the
left/right/up/down view.
[Note:]
・This item is not displayed when [Image capture mode] is in Dual mode.
・When 1 or 2 is selected, the size of the browser may be smaller than the actual
size, depending on the size of the browser when the Image capture size is
[1280x720] or larger, or when [Image capture mode] is Dual mode. When [Dual] is
selected, the size of the browser may be smaller than the actual size of the
browser in any Image capture size.
[Note:]
・The JPEG format (still image) update interval may not be updated at the specified
interval, depending on your network environment or PC.
・If [Dual] is selected in the [Live only] pull-down menu, [Refresh interval : 1s] and
[Refresh interval : 3s] cannot be selected.
49
Advertisement
Table of Contents
