i-PRO WV-X86531-Z2-PTZ User Manual page 381

13 [User mng.] to set authentication
13.1 [User auth.] to configure user-authentication
Digest:Use digest authentication.
Basic:Use basic authentication.
[User name registration]
At the time of new registration, a new username is registered in [User name]. By clicking [▼] on
the [User name registration], you can check the registered users. Registered users are displayed
in [Registered Username [Access level]]. (e.g., admin [1])
Clicking Change on the right-hand side displays the selected user [User name] and allows the user
to change the password. You can delete the selected users by clicking [Delete].
[User name (1 to 32 characters)]
Provide User Name
Number of characters that can be entered:1 to 32 characters
Characters that cannot be entered:Double-byte and single-byte symbols " & : ; ￥
[Password]/[Password (8 to 32 characters)]
Type a password.
Number of characters that can be entered:8 to 32 characters
Characters that cannot be entered:Double-byte and single-byte symbols " &
[Access level]
Set the user access level from the following.
1. [Administrator]You can perform all of the operations of this product.
[Note:]
・To ensure security, [Digest] is recommended for [Authentication]. If you use
[Digest or Basic] or [Basic], [User name] and [Password] may leak.
・If you change the [Authentication] setting, close the web browser and re-access
it.
[Note:]
・Enter the registered user name and press [Register] to overwrite the user
information.
[Note:]
・Enter case-sensitive data.
・Use at least three of the following passwords: uppercase alphabetic characters,
lowercase alphabetic characters, numbers, and symbols.
・Configure the password so that it does not contain the user name.
374