Table of Contents
Advertisement
1 Introduction
1.7 Instructions for use
In order to prevent unintended access by third parties,
● Keep the user authentication setting [On].
For long-term stable performance
Do not use the product in a place with high temperature and high humidity for a long time.
Degradation of parts shortens the life of the product.
Improve the heat dissipation in the installation area and prevent direct exposure to heat such as
heating.
If the power supply is turned off and on repeatedly, failure of the equipment may result.
Handle with care
Do not drop or apply strong shock or vibration. Failure to heed this warning may result in failure.
Do not touch the dome cover directly.
If dirty, image quality may deteriorate.
When an error is detected, restart automatically.
The computer automatically restarts when an error is detected for some reason. When restarting,
the operation cannot be performed for approximately 2 minutes as it was when the power was
turned on.
Operation status detection function
If abnormal operation is continued for 30 seconds or longer due to external noise or the like during
operation, the computer will restart automatically and return to normal operation. The restart
operation is the same as when the power is turned on. However, if the restart occurs frequently,
external noise may be generated frequently in the installation environment of this equipment.
Consult your dealer as soon as possible, as this may cause a malfunction.
Periodic distortion of the screen
If the camera is installed in a place where it vibrates in small increments (for example, close to a
vibrating device), the screen may periodically become distorted to extend and contract lengthwise.
This is a characteristic phenomenon that occurs when the CMOS sensor is used for the image
pickup device. It is caused by periodic movement of the screen and the timing of reading out the
image from the image sensor, and it is not an error in the camera. Reassess the installation
condition and ensure the stability of the camera body to alleviate the problem.
We shall not be liable for any loss of, or direct or indirect damage caused by, any compensation,
recording, or editing of the contents that could not be correctly recorded or edited due to a defect
in the machine or the microSD memory card. The same shall apply to the case of repair of the
Aircraft.
CMOS sensor
● If a portion of the screen is bright, such as spot light, the color filter inside the CMOS sensor
7
Advertisement
Table of Contents
