Table of Contents
Advertisement
3 Setting
3.4 [Image quality] for setting image quality
quality in areas with objects (head, people, cars and motorcycles) and low/medium/medium
image quality in other areas.
・ [Smart P-picture control]
To reduce the amount of data, control the generation of data (macroblock) as little as possible
except where there is an object (head, person, car, or motorcycle).
・ [GOP control]
The GOP control reduces the amount of data.
[JPEG]
Configure the JPEG [Image capture size] [Image quality] [Transmission interval].
・ [Image capture size]
When displaying JPEG images, select the resolution of the images to be displayed.
・ [Image quality]
Set the quality of JPEG images at each resolution.
・ [Refresh interval(JPEG)]
Select the rate at which the JPEG image is updated from the following.
3.4
[Image quality] for setting image quality
On the [Image quality] tabs, you set image quality.
For a detailed explanation of the settings and notes for setting, refer to the [Image quality] tabs on
the image/audio pages in the detailed settings.
→9.4 [Image quality] to set the image quality
[Image quality]
You can set various image quality adjustments such as brightness and sharpness level.
・ [Camera selection]
Select the camera to set the image quality.
[Note:]
・[MULTI] Only Multi-directional cameras can be selected for [Camera selection].
・[MULTI] This item is not displayed when [Image capture mode] is in Quad/Dual
mode.
・[MULTI] For [Common(Cam. 1-2)], [Super Dynamic], [Light control mode],
[White balance], and [Intelligent Auto] can be set only for items that have not
been developed in detail. To perform other advanced settings, select each camera.
137
Advertisement
Table of Contents
