Table of Contents
Advertisement
2 Operation
2.4 Viewing images from mobile/tablet terminals
①[Live image]
Displays the area camera image.
②[Camera switchingArea]
The button for selecting the camera to be displayed in the live image is displayed.
Select the camera from the displayed button to change the displayed camera.
Images of cameras 1, 2, 3 and 4 are displayed at the resolution set in [JPEG] in the [Image]
tabs.
[Note:]
・The operation buttons displayed on the screen of the mobile terminal may not be
displayed depending on the user privileges and function permission settings of the
user to access. If you want to view the operations buttons, you need to set the
user privileges and function permissions ([User mng.] [User auth.]).
→13.1 [User auth.] to configure user-authentication
・If the HTTP port number is changed from 80, [http://IP address:port
*1
number/cam]
Enter the port number of the machine. If you are using the DDNS
function, [http://Host name registered on the DDNS server: Port number/cam]
Please enter.
・If you are configuring [HTTPS] in [HTTPS]-[Connection] on the [Advanced] tab
of the Network Page, enter the following.
Https://IP address: port number/cam or the host name registered with the
https://DDNS server: port number/cam
・When the Authentication dialog appears, enter the administrator's or general
user's username and password. Depending on the mobile phone, the password
may need to be entered each time the screen is switched.
88
*2
Advertisement
Table of Contents
