Table of Contents
Advertisement
3 Setting
3.8 [Alarm] to set alarm
setting values.
→12 [Alarm] to set the alarm
[Alarm]
Set terminal operation and alarm items.
・ [Terminal 1]
Set the operation of terminal 1.
・ [Terminal 2]
Set the operation of terminal 2.
・ [Terminal 3]
Set the operation of terminal 3.
・ [VMD alarm]
ON/OFF is used to specify whether or not to perform operation detection.
When set to [On], the entire area is specified in the operation detection area. To specify an
arbitrary action detection area, set it on the [VMD area] tab of the alarm page of the advanced
setting.
→12.5 [VMD area] for setting motion detection
The [VMD area] tabs on the advanced alarm pages are accessible from live picture links.
・ [Scene change detection (SCD) alarm]
ON/OFF is used to specify whether or not to perform undesired detection.
When set to [On], the entire area is specified in the disturbance detection area. To specify an
optional disturbance detection area, use the [SCD area] tabs on the alarm pages in Advanced
Settings.
→12.7 [SCD area] to set up undesired detection
The [SCD area] tabs on the advanced alarm pages are accessible from live picture links.
・ [Audio detection alarm]
ON/OFF is used to specify whether or not to perform sound detection.
When set to [On], all AI sounds are enabled. To configure the details of sound detection, use
the [Audio detection] tabs on the alarm pages in Advanced Settings.
→12.9 [Audio detection] for setting sound detection
The [Audio detection] tabs on the advanced alarm pages are accessible from live picture links.
・ [Alarm deactivation time]
[Note:]
・Refer to the catalog specifications for the functions installed in each model.
142
Advertisement
Table of Contents
