Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
⑭[PTZ Panel]-Control pad
Left-click the pads and buttons to adjust the horizontal and vertical position of the image (pan
tilt).
The faster the camera operates, the faster the outside of the pad is clicked.
You can also drag and adjust the mouse. Zoom and focus by right-clicking.
Clicking on the upper half of the pad in the upper and lower directions will zoom in the
telephoto, and clicking on the lower half will zoom in the wide angle. Clicking on the left half in
the left and right directions will bring the focus (focus) close to you, and clicking on the right
half will bring it far away. You can also adjust the zoom by using the mouse wheel.
⑮[PTZ panel]--[Auto mode]
Selecting Operation from the pull-down menu starts the selected operation.
When panning, tilting, zooming, or focusing is performed, or when the operation set in [Self
return] or [Camera action on alarm] starts, it is also terminated.
→10.1 [Cam. Function] for setting the operation of cameras
→12.1 [Alarm] to set alarm operation
• [Auto track]: Automatically tracks objects when they are detected.
→10.3 Set auto-tracking (Auto-tracking screen)
• [Auto pan]: Automatically rotates the pre-set range between the start and end positions of the
pan. The pivot operation continues even after the zoom and focus operations (when the [x1]
button of the [Zoom] button is clicked, the pivot operation stops).
→10.2.3 Set auto pan (Auto pan setting screen)
• [Preset sequence 1]/[Preset sequence 2]/[Preset sequence 3] moves the pre-registered
preset positions from the lowest to the lowest.
→10.2.2 Set the preset sequence setting (preset sequence setting screen)
⑯[PTZ-panel]-[Preset]
Select the preset position from the pull-down menu and click the [Move] button to move the
camera's orientation to the preset position registered beforehand.
-Remote and nearby subjects mixed together
-Subjects (white walls, etc.) without contrast
-A horizontal subject, such as a blind-an oblique subject-a dark subject
[Note:]
・If the content of [Self return] operates at the time set by [Self return time] during
the auto mode operation, the auto mode operation stops.
→10.1 [Cam. Function] for setting the operation of cameras
42
Advertisement
Table of Contents
