12 [Alarm] to set the alarm
12.8 [SCD area] to set up undesired detection areas
1
Select the camera from which the area is to be set by [Camera selection].
2
When you drag the mouse on the image and specify an area, the specified area is set to the
area (white) and a frame is displayed. In addition, [Status] becomes [On].
[Important]
・All alarms are not detected while the setting is being changed on the setting
screen. Close the setting screen after setting is completed.
[Note:]
・[MULTI] [Camera selection] can be selected only for Multi-directional cameras.
362